F5 BIG-IP

Gain insights into the performance of your F5 BIG-IP LTM and DNS solutions.

Extension

Product information
Release notes

Overview

The F5 BIG-IP extension uses SNMP to collect data remotely. Data is collected from your F5 devices every minute and continuously analyzed by the Dynatrace platform. The insights provided go beyond simple charting capabilities cover both the Local Traffic Manager (LTM) and DNS (formerly Global Traffic Manager) modules of the BIG-IP platform. The unified analysis pages offer insight into the health and performance of the platform, while the Dynatrace analytics engine baselines and alerts on the most important indicators. The topology-first approach allows Davis AI to investigate and correlate detected problems between components and identify root causes.

This is intended for users who:

Want to monitor the health state and performance of their F5 BIG-IP devices
Look for analysis support for Ops, IT, and network admins.

This enables you to:

Monitor infrastructure with a comprehensive dashboard
Detect traffic anomalies and set up alerting for them
Take pre-emptive measures to avoid service degradations

Compatibility Requirements

F5 BIG-IP devices using SNMP v2c and v3

Use cases

Monitor F5 infrastructure and resource utilization
Understand the health and performance of Local Traffic Manager and DNS
Enable alerting on detected anomalies
Capture BIG-IP notifications by integrating with the SNMP Traps extension.

Get started

Activate the extension in your environment web-UI using the in-product Hub, provide the necessary device configuration, and you’re all set.

Read more in our SNMP extension documentation.

Details

The extension package contains:

SNMP data source configuration for metric ingestion
Topology and relationship definitions for physical (BIG-IP instance, disks, network interfaces) and logical (LTM & DNS virtual servers, pools, pool members, etc.) components of the BIG-IP platform.
Dashboards offering LTM & DNS monitoring overviews and a high level status overview
Alerts covering component availability and resource utilization
Unified Analysis pages for each entity

This extension is built on top of the new Extension 2.0 Framework.

More information can be found on the Dynatrace Product News Blog.

License consumption

Calculating license consumption

This extension runs all SNMP queries every minute. Once data is produced, this is ingested as metric datapoints and subject to license consumption. Whether you are on a Classic or DPS license model, the measurement unit for metric ingestion is based on metric datapoints.

To estimate the amount of metric datapoints produced by your extension configuration, use the following list which gives you a number of metrics per feature set and a multiplier value depending on which entity the metric is split by. Add all of these up and you will have the number of datapoints produced every minute.

default: 3 x F5 Devices
chassis-components: 2 x Fans + 1 x Power supplies + 1 x F5 Devices
device-packet-stats: 10 x F5 Devices
device-entity-counts: 3 x F5 Devices
device-connection-stats: 10 x F5 Devices
instance-sync: 1 x F5 Devices
instance-memory-basic: 2 x F5 Devices
instance-cpu-basic: 10 x F5 Devices
instance-memory-advanced: 5 x F5 Devices
apm-licenses: 2 x F5 Devices
disk: 3 x Disks
interface: 12 x Interfaces
rule: 3 x LTM iRules
gtm-irule: 3 x DNS iRules
profile-http: 6 x HTTP profiles
profile-clientssl: 14 x Client SSL profiles
profile-server-ssl: 9 x Server SSL profiles
profile-serverssl-handshakes-basic: 2 x Server SSL profiles
profile-serverssl-handshakes-advanced: 2 x Server SSL profiles
gtm-dns-profile-state: 1 x DNS profiles
gtm-dns-profile-metrics: 10 x DNS profiles
virtualserver-connectivity-basic: 4 x LTM Virtual servers
virtualserver-syn-cookies: 2 x LTM Virtual servers
virtualserver-advanced: 9 x LTM Virtual servers
virtualserver-basic: 1 x LTM Virtual servers
virtualserver-connectivity-advanced: 3 x LTM Virtual servers
pool-basic: 3 x LTM Pools
pool-connectivity: 4 x LTM Pools
pool-advanced: 4 x LTM Pools
node-basic: 2 x LTM Pool members
node-advanced: 4 x LTM Pool members
node-connectivity: 3 x LTM Pool members
gtm-dnssec: 3 x F5 Devices
gtm-virtual-server-state: 1 x DNS Virtual servers
gtm-virtual-server-metrics-traffic: 5 x DNS Virtual servers
gtm-virtual-server-metrics-resources: 2 x DNS Virtual servers
gtm-virtual-server-metrics-lb: 3 x DNS Virtual servers
gtm-wide-ip-state: 2 x DNS Wide IPs
gtm-wide-ip-metrics: 10 x DNS Wide IPs
gtm-pool-state: 1 x DNS Pools
gtm-pool-metrics: 6 x DNS Pools
gtm-pool-member-state: 1 x DNS Pool members

For example, for a monitoring configuration where all feature sets are enabled, containing 1 F5 BIG-IP Device which has 1 Fan, 1 Power supply, 1 Disk, 1 Interface, 1 LTM iRule, 1 GTM iRule, 1 HTTP profile, 1 Client SSL profile, 1 Server SSL profile, 1 DNS profile, 1 LTM Virtual server, 1 LTM Pool, 1 LTM Pool member, 1 DNS Wide IP, 1 DNS Virtual server, 1 DNS Pool, 1 DNS Pool member, the extension produces 188 metric datapoints per minute.

By extrapolation, it will ingest:

188 x 60 = 11,280 metric datapoints per hour
188 x 60 x 24 = 270,720 metric datapoints per day
188 x 60 x 24 x 365 = 98,812,800 metric datapoints per year

Tips for avoiding license overconsumption:

LTM and DNS modules are rarely configured both on the same device. You should check in advance which applies to your device and only enable those feature sets.
Make use of the rich filtering configuration to only monitor those entities relevant to you, not the entire system.

Troubleshooting

To troubleshoot this extension, use the guide(s) in the Dynatrace Community.

Subscribe to new releases

Copy to clipboard

Extension content

Content typeNumber of items included

screen logs cards

screen actions

alerts

metric metadata

195

screen entities lists

log processing rule

screen injections

document dashboard

generic relationship

generic type

screen message cards

screen properties

screen layout

screen chart groups

metric query

list screen layout

screen dql table

dashboards

Feature sets

Below is a complete list of the feature sets provided in this version. To ensure a good fit for your needs, individual feature sets can be activated and deactivated by your administrator during configuration.

Feature setsNumber of metrics included

Metric name	Metric key	Description	Unit
-	com.dynatrace.extension.network_device.sysuptime	-	-
System uptime (raw)	com.dynatrace.extension.f5.bigip.sys.uptime	The system up time since boot, in system ticks (hundredths of a second)	Count

Metric name	Metric key	Description	Unit
Signature failures	com.dynatrace.extension.f5.bigip.gtm.dnssec.sig_failures_count	Total number of general signature failures.	Count
RRSET failures	com.dynatrace.extension.f5.bigip.gtm.dnssec.rrset_failures_count	Total number of failures due to an RRSET failing to be signed.	Count
DNSKEY queries	com.dynatrace.extension.f5.bigip.gtm.dnssec.dnskey_queries_count	Total number of queries for DNSKEY type.	Count

Metric name	Metric key	Description	Unit
Secure handshakes	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.secure.handshakes.count	The number of handshakes, including mid-stream re-negotiations, performed with peers supporting SSL secure renegotiation.	Count
Handshake failures	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.handshake.failures.count	The total number of handshake failures.	Count

Metric name	Metric key	Description	Unit
-	com.dynatrace.extension.f5.bigip.chassis.fan.state	-	-
Fan speed	com.dynatrace.extension.f5.bigip.chassis.fan.speed	The actual speed of the indexed chassis fan on the system. This is only supported for the platform where the actual fan speed data is available.'0' means fan speed is unavailable while the associated chassis status is good.	Unknown
-	com.dynatrace.extension.f5.bigip.chassis.ps.state	-	-
Chassis temperature	com.dynatrace.extension.f5.bigip.chassis.temperature	The chassis temperature (in Celsius) of the indexed sensor on the system. This is only supported for the platform where the sensor data is available.	Count

Metric name	Metric key	Description	Unit
CPU Usage	com.dynatrace.extension.f5.bigip.gtm.virtualserver.cpu_usage_count	The CPU usage in percentage for the specified virtual server.	Percent
Memory available	com.dynatrace.extension.f5.bigip.gtm.virtualserver.memory_available_count	The memory available in bytes for the specified virtual server.	Byte

Metric name	Metric key	Description	Unit
Connection limit	com.dynatrace.extension.f5.bigip.virtualserver.conn_limit	The maximum number of connections the specified virtual server is allowed to have open at one time	Count
Requests	com.dynatrace.extension.f5.bigip.virtualserver.stat.tot.requests.count	The total number of requests going through the specified virtual server.	Count
Max connections	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.max_conns	The maximum number of connections from client-side to the specified virtual server. This includes queued connections.	Count
Current connections	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.current_conns	The current connections from client-side to the specified virtual server.	Count

Metric name	Metric key	Description	Unit
Dropped packets	com.dynatrace.extension.f5.bigip.sys.droppedPacketRate	The total dropped packets.	Count
Packet errors in	com.dynatrace.extension.f5.bigip.sys.inErrorRate	The total incoming packet errors for the system.	Count
Dropped packets (license)	com.dynatrace.extension.f5.bigip.sys.licenseDeny	The packets which were dropped due to exceeding licensing limitations.	Count
Dropped packets (no handler)	com.dynatrace.extension.f5.bigip.sys.noHandlerDeny	The incoming packets that could not be processed by aa virtual server NAT or SNAT.	Count
Packet errors out	com.dynatrace.extension.f5.bigip.sys.outErrorRate	The total outgoing packet errors for the system.	Count
Dropped packets (no connection)	com.dynatrace.extension.f5.bigip.sys.virtServerNonSynDeny	The packets that are not connection requests and are destined for a virtual server that has no connection for the client address.	Count
Client packets in	com.dynatrace.extension.f5.bigip.sys.clientPacketsIn	The number of packets received by the system from client-side.	Count
Client packets out	com.dynatrace.extension.f5.bigip.sys.clientPacketsOut	The number of packets sent to client-side from the system.	Count
Server packets in	com.dynatrace.extension.f5.bigip.sys.serverPacketsIn	The number of packets received by the system from server-side.	Count
Server packets out	com.dynatrace.extension.f5.bigip.sys.serverPacketsOut	The number of packets sent to server-side from the system.	Count

Metric name	Metric key	Description	Unit
Requests	com.dynatrace.extension.f5.bigip.gtm.wip.requests_count	The number of total requests for the specified wide IP.	Count
Resolutions	com.dynatrace.extension.f5.bigip.gtm.wip.resolutions_count	The number of total resolutions for the specified wide IP.	Count
Persisted requests	com.dynatrace.extension.f5.bigip.gtm.wip.persisted_requests_count	The number of persisted requests for the specified wide IP.	Count
Preferred lb requests	com.dynatrace.extension.f5.bigip.gtm.wip.lb_preferred_count	The number of times which the preferred load balance method is used for the specified wide IP.	Count
Fallback lb requests	com.dynatrace.extension.f5.bigip.gtm.wip.lb_fallback_count	The number of times which the fallback load balance method is used for the specified wide IP.	Count
Alternate lb requests	com.dynatrace.extension.f5.bigip.gtm.wip.lb_alternate_count	The number of times which the alternate load balance method is used for the specified wide IP.	Count
Dropped messages	com.dynatrace.extension.f5.bigip.gtm.wip.dropped_count	The number of dropped DNS messages for the specified wide IP.	Count
Return to DNS	com.dynatrace.extension.f5.bigip.gtm.wip.return_to_dns_count	The number of times which a resolve was returned to DNS (for resolution) for the specified wide IP.	Count
Return from DNS	com.dynatrace.extension.f5.bigip.gtm.wip.return_from_dns_count	The number of times which a resolve was returned from DNS for the specified wide IP.	Count
CNAME resolutions	com.dynatrace.extension.f5.bigip.gtm.wip.cname_resolutions_count	The number of times which a query is resolved by the CNAME of pools associated with the specified Wide IP.	Count

Metric name	Metric key	Description	Unit
Preferred lb requests	com.dynatrace.extension.f5.bigip.gtm.pool_member.lb_preferred_count	The number of times which the preferred load balance method is used for the specified pool member.	Count
Alternate lb requests	com.dynatrace.extension.f5.bigip.gtm.pool_member.lb_alternate_count	The number of times which the preferred load balance method is used for the specified pool member.	Count
Fallback lb requests	com.dynatrace.extension.f5.bigip.gtm.pool_member.lb_fallback_count	The number of times which the fallback load balance method is used for the specified pool member.	Count

Metric name	Metric key	Description	Unit
DNS queries	com.dynatrace.extension.f5.bigip.gtm.profile.queries_count	The total number of DNS queries.	Count
DNS responses	com.dynatrace.extension.f5.bigip.gtm.profile.responses_count	The total number of DNS responses.	Count
Cache requests	com.dynatrace.extension.f5.bigip.gtm.profile.to_cache_count	The number of requests sent to the DNS cache.	Count
DNS requests	com.dynatrace.extension.f5.bigip.gtm.profile.to_dns_count	The number of requests sent to backend DNS.	Count
Dropped messages	com.dynatrace.extension.f5.bigip.gtm.profile.drops_count	The number of packets dropped (not sent to GTM, DNS-Express, DNSSEC, DNS64, or Backend DNS (e.g. BIND)).	Count
NOERROR responses	com.dynatrace.extension.f5.bigip.gtm.profile.resp_noerror_count	The number of NOERROR responses sent.	Count
NXDOMAIN responses	com.dynatrace.extension.f5.bigip.gtm.profile.resp_nxdomain_count	The number of responses whose return code is NXDOMAIN.	Count
SERVFAIL responses	com.dynatrace.extension.f5.bigip.gtm.profile.resp_servfail_count	The number of responses whose return code is SERVFAIL.	Count
REFUSED responses	com.dynatrace.extension.f5.bigip.gtm.profile.resp_refused_count	The number of responses whose return code is REFUSED.	Count
Malicious packets	com.dynatrace.extension.f5.bigip.gtm.profile.malicious_count	The number of malicious packets received.	Count

Metric name	Metric key	Description	Unit
APM current connections	com.dynatrace.extension.f5.bigip.apm.current_conns	The total current SSL/VPN connections in the system	Count
APM connectivity licenses	com.dynatrace.extension.f5.bigip.apm.total_licenses	The total connectivity session licenses in the system	Count

Metric name	Metric key	Description	Unit
Block size	com.dynatrace.extension.f5.bigip.sys.host.disk.block.size	The number of bytes in the specified partition.	Byte
Total blocks	com.dynatrace.extension.f5.bigip.sys.host.disk.total.blocks	The number of total blocks in the specified partition.	Count
Free blocks	com.dynatrace.extension.f5.bigip.sys.host.disk.free.blocks	The number of free blocks in the specified partition.	Count

Metric name	Metric key	Description	Unit
-	com.dynatrace.extension.network_device.lldp_neighbor	-	-

Metric name	Metric key	Description	Unit
Pool member state	com.dynatrace.extension.f5.bigip.gtm.pool_member.state	State metric which captures details of F5 DNS (GTM) Pool Members. Value is always 1.	NotApplicable

Metric name	Metric key	Description	Unit
Insecure handshakes accepted	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.insecure.handshake.accepts.count	The number of handshakes, including mid-stream re-negotiations, performed with peers not supporting SSL secure renegotiation.	Count
Insecure handshakes rejected	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.insecure.handshake.rejects.count	The number of rejected initial handshakes with peers not supporting SSL secure renegotiation.	Count
Insecure renegotiations rejected	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.insecure.renegotiation.rejects.count	The number of rejected renegotiation attempts by peers not supporting SSL secure renegotiation.	Count

Metric name	Metric key	Description	Unit
Virtual server state	com.dynatrace.extension.f5.bigip.virtualserver.state	General state metric for the server. Value is always 1, but dimensions carry all details of a virtual server.	Unspecified

Metric name	Metric key	Description	Unit
-	com.dynatrace.extension.network_device.cpu_usage	-	-
-	com.dynatrace.extension.network_device.memory_used	-	-
-	com.dynatrace.extension.network_device.memory_total	-	-
Idle CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.idle1m	The average time spent by the specified processor doing nothing for the system in the last one minute.	Percent
IO Wait CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.iowait1m	The average time spent by the specified processor waiting for external I/O to complete for the system in the last one minute.	Percent
IRQ CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.irq1m	The average time spent by the specified processor servicing hardware interrupts for the system in the last one minute.	Percent
Soft IRQ CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.softirq1min	The average time spent by the specified processor servicing soft interrupts for the system in the last one minute.	Percent
Stolen CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.stolen1m	The average time 'stolen' from the system in the last one minute.	Percent
System CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.system1m	The average time spent by the specified processor servicing system calls for the system in the last one minute.	Percent
User CPU	com.dynatrace.extension.f5.bigip.sys.global.host.cpu.user1m	The average time spent by the specified processor in user context for the system in the last one minute.	Percent

Metric name	Metric key	Description	Unit
Profile state	com.dynatrace.extension.f5.bigip.gtm.profile.state	A state metric containing the details of a DNS Profile. The value is always 1, use the dimensions to understand the details.	NotApplicable

Metric name	Metric key	Description	Unit
-	com.dynatrace.extension.network_device.if.bytes_in.count	-	-
-	com.dynatrace.extension.network_device.if.bytes_out.count	-	-
-	com.dynatrace.extension.network_device.if.status	-	-
Status	com.dynatrace.extension.f5.bigip.sys.interface.status	The current state of the specified interface.	Unspecified
Bytes received	com.dynatrace.extension.f5.bigip.sys.interface.stat.bytes.in.count	The number of bytes received on the specified interface.	Byte
Bytes transmitted	com.dynatrace.extension.f5.bigip.sys.interface.stat.bytes.out.count	The number of bytes transmitted out of the specified interface.	Byte
Packets received	com.dynatrace.extension.f5.bigip.sys.interface.stat.pkts.in.count	The number of packets received on this interface.	Count
Packets transmitted	com.dynatrace.extension.f5.bigip.sys.interface.stat.pkts.out.count	The number of packets transmitted out of the specified interface.	Count
Dropped incoming packets	com.dynatrace.extension.f5.bigip.sys.interface.stat.drops.in.count	The number of packets dropped on ingress for various reasons on the specified interface.	Count
Dropped outgoing packets	com.dynatrace.extension.f5.bigip.sys.interface.stat.drops.out.count	The number of packets aged out or with excessive transmission delays due to multiple deferrals on the specified interface.	Count
Incoming errors	com.dynatrace.extension.f5.bigip.sys.interface.stat.errors.in.count	The number of received packets that are either undersized, oversized, or have FCS errors by the specified interface.	Count
Outgoing errors	com.dynatrace.extension.f5.bigip.sys.interface.stat.errors.out.count	The number of excessive collisions, incremented for each frame that experienced 16 collisions during transmission and was aborted on the specified interface.	Count

Metric name	Metric key	Description	Unit
System Users	com.dynatrace.extension.f5.bigip.sys.host.num_users	The number of user sessions for which this host is storing state information. hrSystemNumUsers	Count
System Processes	com.dynatrace.extension.f5.bigip.sys.host.num_processes	The number of process contexts currently loaded or running on this system. hrSystemProcesses	Count
System Max Processes	com.dynatrace.extension.f5.bigip.sys.host.max_processes	The maximum number of process contexts this system can support. hrSystemMaxProcesses	Count
Load Average 1min	com.dynatrace.extension.f5.bigip.sys.host.load_average	The 1 minute load average. laLoad	Count

Metric name	Metric key	Description	Unit
Common connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.tot.compat.conns.count	The total number of concurrent compat connections with established SSL sessions being maintained by the filter.	Count
Native connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.tot.native.conns.count	The total number of concurrent native connections with established SSL sessions being maintained by the filter.	Count
Fatal alerts	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.fatal.alerts.count	The total number of the fatal alerts.	Count
DTLSv1 connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.dtlsv1.count	The total connections for SSL DTLS protocol version 1.	Count
DTLSv2 connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.sslv2.count	The total connections for SSL protocol version 2.	Count
SSLv3 connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.sslv3.count	The total connections for SSL protocol version 3.	Count
TLSv1.1 connections.count	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.tlsv11.count	The total connections for SSL TLS protocol version 1.1.	Count
TLSv1.2 connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.tlsv12.count	The total connections for SSL TLS protocol version 1.2.	Count
TLSv1 connections	com.dynatrace.extension.f5.bigip.profile.server.ssl.stat.tlsv1.count	The total connections for SSL TLS protocol version 1.	Count

Metric name	Metric key	Description	Unit
Client bytes in	com.dynatrace.extension.f5.bigip.sys.clientBytesIn	The number of bytes received by the system from client-side.	Byte
Client bytes out	com.dynatrace.extension.f5.bigip.sys.clientBytesOut	The number of bytes sent to client-side from the system.	Byte
Server bytes in	com.dynatrace.extension.f5.bigip.sys.serverBytesIn	The number of bytes received by the system from server-side.	Byte
Server bytes out	com.dynatrace.extension.f5.bigip.sys.serverBytesOut	The number of bytes sent to server-side from the system.	Byte
Client current connections	com.dynatrace.extension.f5.bigip.sys.clientCurConns	The current connections from client-side to the system.	Count
Client max connections	com.dynatrace.extension.f5.bigip.sys.clientMaxConns	The maximum connections from client-side to the system.	Count
Server current connections	com.dynatrace.extension.f5.bigip.sys.serverCurConns	The current connections from server-side to the system.	Count
Server max connections	com.dynatrace.extension.f5.bigip.sys.serverMaxConns	The maximum connections from server-side to the system.	Count
Pva client current connections	com.dynatrace.extension.f5.bigip.sys.hwClientCurConns	The current hardware accelerated connections from client-side to the system.	Count
Pva client max connections	com.dynatrace.extension.f5.bigip.sys.hwClientMaxConns	The maximum hardware accelerated connections from client-side to the system.	Count

Metric name	Metric key	Description	Unit
APM total access profile sessions	com.dynatrace.extension.f5.bigip.apm.profile.total_sessions.count	The total user sessions in the specified access profile. apmPaStatTotalSessions	Count
APM active access profile sessions	com.dynatrace.extension.f5.bigip.apm.profile.active_sessions.count	The total active user sessions in the specified access profile. apmPaStatCurrentActiveSessions	Count

Metric name	Metric key	Description	Unit
DNS Pool state	com.dynatrace.extension.f5.bigip.gtm.pool.state	State metric which captures details of DNS (GTM) Pools. Value is always 1.	NotApplicable

Metric name	Metric key	Description	Unit
Accepted syn cookies	com.dynatrace.extension.f5.bigip.virtualserver.stat.wl.syncookie.accepts.count	The number of whitelist syn cookies received that were accepted.	Count
Rejected syn cookies	com.dynatrace.extension.f5.bigip.virtualserver.stat.wl.syncookie.rejects.count	The number of whitelist syn cookies received that were rejected.	Count

Metric name	Metric key	Description	Unit
Failures	com.dynatrace.extension.f5.bigip.rule.event.stat.failures.count	The number of failures for executing the specified rule.	Count
Aborts	com.dynatrace.extension.f5.bigip.rule.event.stat.aborts.count	The number of aborts when executing the specified rule.	Count
Executions	com.dynatrace.extension.f5.bigip.rule.event.stat.total.executions.count	The total number of event executions for the specified rule.	Count

Metric name	Metric key	Description	Unit
Bytes received	com.dynatrace.extension.f5.bigip.pool_member.stat.server.bytes.in.count	The number of bytes received by the specified pool member from server-side.	Byte
Bytes transmitted	com.dynatrace.extension.f5.bigip.pool_member.stat.server.bytes.out.count	The number of bytes sent to server-side from the specified pool member.	Byte
Packets received	com.dynatrace.extension.f5.bigip.pool_member.stat.server.pkts.in.count	The number of packets received by the specified pool member from server-side.	Count
Packets transmitted	com.dynatrace.extension.f5.bigip.pool_member.stat.server.pkts.out.count	The number of packets sent to server-side from the specified pool member.	Count

Metric name	Metric key	Description	Unit
Bytes received	com.dynatrace.extension.f5.bigip.pool.stat.server.bytes.in.count	The number of bytes received by the specified pool from server-side.	Byte
Bytes transmitted	com.dynatrace.extension.f5.bigip.pool.stat.server.bytes.out.count	The number of bytes sent to server-side from the specified pool.	Byte
Packets received	com.dynatrace.extension.f5.bigip.pool.stat.server.pkts.in.count	The number of packets received by the specified pool from server-side.	Count
Packets transmitted	com.dynatrace.extension.f5.bigip.pool.stat.server.pkts.out.count	The number of packets sent to server-side from the specified pool.	Count

Metric name	Metric key	Description	Unit
Failures	com.dynatrace.extension.f5.bigip.rule.event.stat.failures.count	The number of failures for executing the specified rule.	Count
Aborts	com.dynatrace.extension.f5.bigip.rule.event.stat.aborts.count	The number of aborts when executing the specified rule.	Count
Executions	com.dynatrace.extension.f5.bigip.rule.event.stat.total.executions.count	The total number of event executions for the specified rule.	Count

Metric name	Metric key	Description	Unit
Total memory	com.dynatrace.extension.f5.bigip.sys.host.memory.total	The total host memory in bytes (not including TMM). This is for a single host system.	Byte
Used memory	com.dynatrace.extension.f5.bigip.sys.host.memory.used	The host memory in bytes currently in use (not including TMM). This is for a single host system.	Byte

Metric name	Metric key	Description	Unit
Failover and Sync status	com.dynatrace.extension.f5.bigip.sys.cm.state	The failover and config synchronization status of the device. Failover states can be: (0)unknown - the failover status of the device is unknown; (1)offline - the device is offline; (2)forcedOffline - the device is forced offline; (3)standby - the device is standby; (4)active - the device is active. Synchronization status can be: unknown(0), syncing(1), needManualSync(2), inSync(3), syncFailed(4), syncDisconnected(5), standalone(6), awaitingInitialSync(7), incompatibleVersion(8), partialSync(9)	NotApplicable

Metric name	Metric key	Description	Unit
Ephemeral connections	com.dynatrace.extension.f5.bigip.virtualserver.stat.ephemeral.tot.conns.count	The total ephemeral connections to the specified virtual server.	Count
Slow connections killed	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.slow.killed.count	The number of slow client-side connections that have been killed on the specified virtual server.	Count
Evicted connections	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.evicted.conns.count	The number of client-side connections that have been evicted on the specified virtual server.	Count

Metric name	Metric key	Description	Unit
Requests	com.dynatrace.extension.f5.bigip.pool_member.stat.tot.requests.count	The total number of requests going through the specified pool member.	Count
Current connections	com.dynatrace.extension.f5.bigip.pool_member.stat.server.current_conns	The current number of connections from server-side to the specified pool member.	Count
Queued connections	com.dynatrace.extension.f5.bigip.pool_member.stat.server.queued_conns	The number of connections currently in queue.	Count

Metric name	Metric key	Description	Unit
Monitor status	com.dynatrace.extension.f5.bigip.pool_member.monitor.status	The hierarchical load balance state for the specified node address, including parent status. Value is always 1. Status dimension takes values: unchecked(0), checking(1), inband(2), up(3), addr-down(18), down(19), forced-down(20), maint(21), irule-down(22), inband-down(23), down-manual-resume(24)	Unspecified
Pool Member state	com.dynatrace.extension.f5.bigip.pool_member.state	General state metric for the pool_member. Value is always 1, but dimensions 'Enabled state' and 'Availability state' define the state. The availability state takes the following values: 0 (none/error); 1 (green/available in some capacity); 2 (yellow/not currently available); 3 (red/not available); 4 (blue/availability is unknown); 5 (gray/unlicensed). Enabled state takes values 0 (none), 1 (enabled), 2 (disabled), 3 (disabled by parent).	Unspecified

Metric name	Metric key	Description	Unit
Physical Sensor Value	com.dynatrace.extension.f5.bigip.sensor.value	The most recent measurement obtained by the agent for this sensor. entPhySensorValue	Count

Metric name	Metric key	Description	Unit
Members	com.dynatrace.extension.f5.bigip.pool.member.cnt	The total number of members in the specified pool.	Count
Active members	com.dynatrace.extension.f5.bigip.pool.active.member.cnt	The number of the current active members in the specified pool.	Count
Pool state	com.dynatrace.extension.f5.bigip.pool.state	General state metric for the pool. Value is always 1, but dimensions 'Enabled state' and 'Availability state' define the state. The availability state takes the following values: 0 (none/error); 1 (green/available in some capacity); 2 (yellow/not currently available); 3 (red/not available); 4 (blue/availability is unknown); 5 (gray/unlicensed). Enabled state takes values 0 (none), 1 (enabled), 2 (disabled), 3 (disabled by parent).	Unspecified

Metric name	Metric key	Description	Unit
Virtual server state	com.dynatrace.extension.f5.bigip.gtm.virtualserver.state	State metric describing the details of a DNS virtual server. The value is always 1, use the dimensions to understand the details.	NotApplicable

Metric name	Metric key	Description	Unit
Preferred lb requests	com.dynatrace.extension.f5.bigip.gtm.pool.lb_preferred_count	The number of times which the preferred load balance method is used for the specified pool.	Count
Alternate lb requests	com.dynatrace.extension.f5.bigip.gtm.pool.lb_alternate_count	The number of times which the alternate load balance method is used for the specified pool.	Count
Fallback lb requests	com.dynatrace.extension.f5.bigip.gtm.pool.lb_fallback_count	The number of times which the fallback load balance method is used for the specified pool.	NotApplicable
Dropped messages	com.dynatrace.extension.f5.bigip.gtm.pool.dropped_count	The number of dropped DNS messages for the specified pool.	Count
Return to DNS	com.dynatrace.extension.f5.bigip.gtm.pool.return_to_dns_count	The number of times which a resolve was returned to DNS (for resolution) for the specified pool.	Count
Return from DNS	com.dynatrace.extension.f5.bigip.gtm.pool.return_from_dns_count	The number of times which a resolve was returned from DNS for the specified pool.	Count

Metric name	Metric key	Description	Unit
Wide IP state	com.dynatrace.extension.f5.bigip.gtm.wip.state	State metric which captures the metadata details of an F5 DNS (GTM) Wide IP. The value is always 1.	NotApplicable
Wide IP to Pool link	com.dynatrace.extension.f5.bigip.gtm.wip.pool_link	Relational metric linking F5 DNS (GTM) Pools to a Wide IP	NotApplicable

Metric name	Metric key	Description	Unit
CPU Usage	com.dynatrace.extension.f5.bigip.virtualserver.stat.vs.usage.ratio1m	The percentage of time Virtual Server was busy over the last 1 minute.	Percent
Bytes received	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.bytes.in.count	The number of bytes received by the specified virtual server from client-side.	Byte
Ephemeral bytes received	com.dynatrace.extension.f5.bigip.virtualserver.stat.ephemeral.bytes.in.count	The number of bytes received ephemeral by the specified virtual server.	Byte
Bytes transmitted	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.bytes.out.count	The number of bytes sent to client-side from the specified virtual server.	Byte
Ephemeral bytes transmitted	com.dynatrace.extension.f5.bigip.virtualserver.stat.ephemeral.bytes.out.count	The number of bytes transmitted ephemeral from the specified virtual server.	Byte
Packets received	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.pkts.in.count	The number of packets received by the specified virtual server from client-side.	Count
Ephemeral packets received	com.dynatrace.extension.f5.bigip.virtualserver.stat.ephemeral.pkts.in.count	The number of packets received ephemeral by the specified virtual server.	Count
Packets transmitted	com.dynatrace.extension.f5.bigip.virtualserver.stat.client.pkts.out.count	The number of packets sent to client-side from the specified virtual server.	Count
Ephemeral packets transmitted	com.dynatrace.extension.f5.bigip.virtualserver.stat.ephemeral.pkts.out.count	The number of packets transmitted ephemeral from the specified virtual server.	Count

Metric name	Metric key	Description	Unit
LTM nodes	com.dynatrace.extension.f5.bigip.ltm.nodes	The number of ltmNodeAddr entries in the table.	Count
LTM pools	com.dynatrace.extension.f5.bigip.ltm.pools	The number of ltmPool entries in the table.	Count
LTM virtual servers	com.dynatrace.extension.f5.bigip.ltm.virtualservers	The number of ltmVirtualServ entries in the table.	Count

Metric name	Metric key	Description	Unit
GET Requests	com.dynatrace.extension.f5.bigip.profile.http.stat.get.reqs.count	The total number of HTTP get requests.	Count
POST Requests	com.dynatrace.extension.f5.bigip.profile.http.stat.post.reqs.count	The total number of HTTP post requests.	Count
2xx Responses	com.dynatrace.extension.f5.bigip.profile.http.stat.resp2xx.cnt.count	The number of server-side responses in range of 200 to 206 (successful responses)	Count
3xx Responses	com.dynatrace.extension.f5.bigip.profile.http.stat.resp3xx.cnt.count	The number of server-side responses in range of 300 to 307 (redirection responses).	Count
4xx Responses	com.dynatrace.extension.f5.bigip.profile.http.stat.resp4xx.cnt.count	The number of server-side responses in range of 400 to 417 (client errors).	Count
5xx Responses	com.dynatrace.extension.f5.bigip.profile.http.stat.resp5xx.cnt.count	The number of server-side responses in range of 500 to 505 (server errors).	Count

Metric name	Metric key	Description	Unit
Common connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.tot.compat.conns.count	The total number of concurrent compat connections with established SSL sessions being maintained by the filter.	Count
Native connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.tot.native.conns.count	The total number of concurrent native connections with established SSL sessions being maintained by the filter.	Count
Fatal alerts	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.fatal.alerts.count	The total number of the fatal alerts.	Count
Secure handshakes	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.secure.handshakes.count	The number of handshakes, including mid-stream re-negotiations, performed with peers supporting SSL secure renegotiation.	Count
Handshake failures	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.handshake.failures.count	The total number of handshake failures.	Count
Insecure handshakes accepted	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.insecure.handshake.accepts.count	The number of handshakes, including mid-stream re-negotiations, performed with peers not supporting SSL secure renegotiation.	Count
Insecure handshakes rejected	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.insecure.handshake.rejects.count	The number of rejected initial handshakes with peers not supporting SSL secure renegotiation.	Count
Insecure renegotiations rejected	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.insecure.renegotiation.rejects.count	The number of rejected renegotiation attempts by peers not supporting SSL secure renegotiation.	Count
DTLSv1 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.dtlsv1.count	The total connections for SSL DTLS protocol version 1.0.	Count
SSLv2 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.sslv2.count	The total connections for SSL protocol version 2.	Count
SSLv3 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.sslv3.count	The total connections for SSL protocol version 3.	Count
TLSv1 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.tlsv1.count	The total connections for SSL TLS protocol version 1.	Count
TLSv1.1 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.tlsv11.count	The total connections for SSL TLS protocol version 1.1.	Count
TLSv1.2 connections	com.dynatrace.extension.f5.bigip.profile.client.ssl.stat.tlsv12.count	The total connections for SSL TLS protocol version 1.2.	Count

Metric name	Metric key	Description	Unit
Requests	com.dynatrace.extension.f5.bigip.pool.stat.tot.requests.count	The total number of requests to the specified pool.	Count
Current connections	com.dynatrace.extension.f5.bigip.pool.stat.server.current_conns	The current number of connections from server-side to the specified pool.	Count
Queued connections	com.dynatrace.extension.f5.bigip.pool.stat.server.queued_conns	The number of connections currently in queue	Count
Current sessions	com.dynatrace.extension.f5.bigip.pool.stat.cur.sessions	The current number of sessions to the specified pool.	Count

Metric name	Metric key	Description	Unit
APM total system sessions	com.dynatrace.extension.f5.bigip.apm.session.system_total	The total sessions created in the system. apmAccessStatTotalSessions	Count
APM active system sessions	com.dynatrace.extension.f5.bigip.apm.session.system_active.count	The total active user sessions in the system. apmAccessStatCurrentActiveSessions	Count

Metric name	Metric key	Description	Unit
Bits received	com.dynatrace.extension.f5.bigip.gtm.virtualserver.bits_persec_in_count	The number of bits per second received by the specified virtual server.	BitPerSecond
Bits sent	com.dynatrace.extension.f5.bigip.gtm.virtualserver.bits_persec_out_count	The number of bits per second sent by the specified virtual server.	BitPerSecond
Packets received	com.dynatrace.extension.f5.bigip.gtm.virtualserver.pkts_persec_in_count	The number of packets per second received by the specified virtual server.	PerSecond
Packets sent	com.dynatrace.extension.f5.bigip.gtm.virtualserver.pkts_persec_out_count	The number of packets per second received by the specified virtual server.	PerSecond
Connections	com.dynatrace.extension.f5.bigip.gtm.virtualserver.connections_count	The number of total connections to the specified virtual server.	Count

Metric name	Metric key	Description	Unit
Total swap	com.dynatrace.extension.f5.bigip.mem.total.swap	The total amount of swap space configured for this host.	KiloByte
Available swap	com.dynatrace.extension.f5.bigip.mem.avail.swap	The amount of swap space currently unused or available.	KiloByte
Shared memory	com.dynatrace.extension.f5.bigip.mem.shared	The total amount of real or virtual memory currently allocated for use as shared memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.	KiloByte
Cached memory	com.dynatrace.extension.f5.bigip.mem.cached	The total amount of real or virtual memory currently allocated for use as cached memory. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.	KiloByte
Buffer memory	com.dynatrace.extension.f5.bigip.mem.buffer	The total amount of real or virtual memory currently allocated for use as memory buffers. This object will not be implemented on hosts where the underlying operating system does not explicitly identify memory as specifically reserved for this purpose.	KiloByte

Full version history

To have more information on how to install the downloaded package, please follow the instructions on this page.

ReleaseDate

Full version history

Fixed in this version:

Virtual Server properties for SNAT Type and SNAT Pool were not populating due to deprecated OIDs

Improved in this version:

LTM Pool Members can now be part of multiple Pools. The relation was changed from isInstanceOf to calls to support many-to-many cardinality.

Full version history

Improved in this version

Minimum requirement for ActiveGate lowered to 1.303.0

Full version history

New in this version:

AppEngine-compatible dashboards

Improved in this version:

Pool Members are linked to specific Process entities rather than the Host entity

Full version history

New in this version:

Configuration parameter introduced for ignoring "forced-down" pool members. This can be used in active/active failover setups to keep data accurate by dropping any datapoints coming from the active but forced-down members.

Full version history

Fixed in this version

Messaged cards were misconfigured in AppEngine screens

Full version history

Fixed in this version:

Minimum schema version was not correctly enforced
Dashboards would reference a non-existent metric for counting the number of instances

Full version history

Improved in this version:

Network charts converted to rate/min to allow accurate visualization over larger timeframes

Fixed in this version:

Collecting the F5 Self IPs would cause the device to continuously switch IP address. Self IPs are no longer collected and the device only references the Management IP address

Full version history

Fixed in this version:

Log processing rules automatically convert to DQL to allow for Open Pipeline enablement

Full version history

Fixed in this version:

Recently introduced metrics for device and interface now apply the existing feature sets and filters to reduce license consumption.

Full version history

✨ New in this version:

Device-level statistics added across several feature sets
- device-connection-stats covers connectivity and traffic statistics
- device-packet-stats is a more detailed set of metrics covering statistics at packet level
- entity-counts gives a view of total nodes, pools, and virtual servers
Hardware component states are now tracked via chassis-components feature set
- Note: these metrics will not populate unless the device supports these hardware metrics
APM licenses are now tracked in the apm-licenses feature set
Additional enitities were added for representing F5 as a network device

Full version history

🪲 Fixed in this version:

LTM Overview dashboard referenced non-existent metric keys

Full version history

✨ New in this version:

Queued connections are tracked for LTM Pools and Pool Members
Connection limit is now a metric for LTM Virtual Servers

🚀 Improved in this version:

Relationship between LTM Virtual Server and DNS Virtual Server is displayed on entity properties cards
The "Total connections" counter metric for LTM Virtual Servers, Pools, and Pool Members has been replaced with gauge metrics that show current and maximum connections.

🪲 Fixed in this version:

Logs from traps would all have level NONE

Full version history

✨ New in this version:

Added support for BIG-IP DNS (formerly GTM), including:
- Entities: DNS Wide IPs, Pools, Virtual Servers, Traffic Profiles
- Metrics: as defined by the feature sets starting with "gtm"
- Configuration filtering options similar to the LTM part of the extension
Added a GTM Overview Dashboard to showcase the newly added features

Full version history

🚀 Improved in this version:

Availability state displayed next to state detail in tables of Pool, Pool Member, and Virtual server entities
Smoothing strategy added to charts of counter metrics to avoid inaccurate spikes
"Monitored server" filter added to lists of pool members to allow browsing OneAgents and Custom Devices

Full version history

🚀 Improved in this version:

Better support for HA clustered devices.
- LTM Data is no longer collected for devices not in "active" failover mode. These devices will register only infrastructure metrics.
- Pool Members and Virtual Servers use IP Address & Port Number for unique entity creation. This means in a failover event, these entities are no longer duplicated and maintain a continuous view of performance.

🪲 Fixed in this version:

Availablility alerts trigger false positives for Pool Members and Virtual Servers which are expected to be unavailable.
- All availability alerting now filters for data coming only from "active" devices. This means alerts are no longer raised for entities being unavailable on "standby" F5 devices.
A deprecated OID was causing some Pool Member performance metrics to not be linked with entities

⚠️ Note:

When upgrading from a previous version of this extension, all existing Pool Member and Virtual Server entities will be temporarily duplicated!
- This is an unavoidable side effect of changing the entity ID pattern (from using names, to using IP addresses) in order to provide support for clustered deployments.

Full version history

🚀 Improved in this version:

Chart colors match the value of their dimensions [RFE]
Pool name filters now extend to their pool members too. This should reduce the amount of duplication when adding the pool member filtering.
- Example: $prefix(/Common/) will include for monitoring Pools in the Common partition as well as their pool members.
Filtering fields now support up to 50,000 characters
Graph charts connect gaps for a better view of the data

🪲 Fixed in this version:

In very large environments, entity list screens would be empty due to loose entity selector condition

Full version history

✨ New in this version:

Larger feature sets have been split further to offer more flexibility with metric collection and DDU consumption
Pool Members can create topology relationships to other Custom Devices. For example, when the Pool Member points to a DataPower device monitored through a different extension.

⚠️ Note:

After updating, the newly introduced feature sets (around connectivity metrics) are disabled by default. These must be enabled manually otherwise the metrics are not collected.

Full version history

🪲 Fixed in this version:

Management Zones no longer need metric-based rules to include all data. Entity selector are sufficient.

Full version history

🪲 Fixed in this version:

This version also works with ActiveGate 1.253

Full version history

✨ New in this version:

Configuration variables now support multi-line text of up to 10,000 characters
F5 Traps are now processed as logs and linked to the F5 instance
- This feature relies on the SNMP Traps Extension

🪲 Fixed in this version:

Virtual server unavailability alert message contains an invalid placeholder
Direct update of previous configurations not possible
Properties card of F5 Instance would display an error if the SNMP Traps extension is missing

Full version history

Fixed in this version:

Interface MAC Address removed due to invalid hex formatting from F5

Full version history

New in this version:

Quick actions to configure extension and read documentation are available on all default screens
Messaging around list of monitored pools improved
Create alert action enabled on all charts where possible

Fixed in this version:

"Pool member name" property of the F5 Instance correctly renamed to "Node name"

Full version history

No release notes

Full version history

New in this version:

"Node" has been renamed everywhere to "Pool Member" for clarity
Screen Improvements:
- Instance, Pool Member, Virtual Service, and Pool screens have been redesigned
- Filtering by related entities has been added on all lists
Topology Improvements:
- Pool Members are separated by port number
- Pool Members are automatically linked to OneAgent-monitored Hosts

Fixed in this version:

Soft IRQ CPU reported incorrect values (metric key has been renamed to com.dynatrace.extension.f5.bigip.sys.global.host.cpu.softirq1min)
Some charts on the Overview and Status dashboards would show incorrect values for absolute timeframes

Version requirements:

Min. ActiveGate and Dynatrace version 1.241

Full version history

Min. Dynatrace version updated to 1.237

Full version history

New in this version:

All entity screens use Breadcrumbs for easy navigation
All entities use custom icons
Two Custom Events for Alerting are provided for High CPU Usage on the F5 Instance and Virtual Servers
All metrics now have readable dimension names
The F5 Profile entity details page now hides metrics that don't apply to the profile type

Fixed in this version:

F5 Profile entity list page not listing its members
Update to metric selector formatting prevented users from deploying to Dynatrace 1.232+

Minimum platform requirements:

Dynatrace ActiveGate 1.230
Dynatrace Cluster 1.2300

Full version history

No release notes

Discover recent additions to Dynatrace

Problems

Analyze abnormal system behavior and performance problems detected by Davis AI.

Logs

Explore all your logs without writing a single query.

Security Investigator

Fast and precise forensics for security and logs on Grail data with DQL queries.

Business Flow

Track, analyze, and optimize your critical business processes.

Cost & Carbon Optimization

Track, analyze, and optimize your IT carbon footprint and public cloud costs.

Davis Anomaly Detection

Detect anomalies in timeseries using the Davis AI

Analyze your data

Understand your data better with deep insights and clear visualizations.

Notebooks

Create powerful, data-driven documents for custom analytics and collaboration.

Dashboards

Transform complex data into clear visualizations with custom dashboards.

Automate your processes

Turn data and answers into actions, securely, and at scale.

Workflows

Automate tasks in your IT landscape, remediate problems, and visualize processes

Jira

Create, query, comment, transition, and resolve Jira tickets within workflows.

Slack

Automate Slack messaging for security incidents, attacks, remediation, and more.

Secure your cloud application

See vulnerabilities and attacks in your environment.

Security Overview

Get a comprehensive overview of the security of your applications.

Code-Level Vulnerabilities

Detect vulnerabilities in your code in real time.

Threats & Exploits

Understand, triage, and investigate application security findings and alerts.

Are you looking for something different?

We have hundreds of apps, extensions, and other technologies to customize your environment

Leverage our newest innovations of Dynatrace Saas

Provided by

Resources

Support

Full version history

Fixed in this version:

Improved in this version:

Full version history

Improved in this version

Full version history

New in this version:

Improved in this version:

Full version history

New in this version:

Full version history

Fixed in this version

Full version history

Fixed in this version:

Full version history

Improved in this version:

Fixed in this version:

Full version history

Fixed in this version:

Full version history

Fixed in this version:

Full version history

✨ New in this version:

Full version history

🪲 Fixed in this version:

Full version history

✨ New in this version:

🚀 Improved in this version:

🪲 Fixed in this version:

Full version history

✨ New in this version:

Full version history

🚀 Improved in this version:

Full version history

🚀 Improved in this version:

🪲 Fixed in this version:

⚠️ Note:

Full version history

🚀 Improved in this version:

🪲 Fixed in this version:

Full version history

✨ New in this version:

⚠️ Note:

Full version history

🪲 Fixed in this version:

Full version history

🪲 Fixed in this version:

This version also works with ActiveGate 1.253

Full version history

✨ New in this version:

🪲 Fixed in this version:

Full version history

Fixed in this version:

Full version history

Full version history

Full version history

New in this version:

Fixed in this version:

Version requirements:

Full version history

Full version history

Full version history